VENDOTEK T Switch 8 

✔ 8 port switch that provides Ethernet communication between public transport fare payment devices based on Passive PoE technology. 

 

✔ VENDOTEK T Switch 8 provides network connectivity for Vendotek T Full validators managing a network of Vendotek T Lite validators or other slave devices.

 

✔  No special software pre-installation is required, the product starts working immediately after power supply.

 

✔  VENDOTEK T Switch 8 is made for professional installation of validators and other equipment in transport. The product is equipped with individual protection of each connected device.

 

✔  The device can be installed in the vehicle or in the driver's cab. Installation is carried out on a vertical or horizontal flat surface using mounting holes located on the housing.

✔  You can turn off the power by using an external GPIO/RS232. An external button can be connected.  The power-off time for a single pulse is up to 3 seconds.

 

✔  The device provides:

- exchange of information between several devices (validators) via a local Ethernet network;

- reliable switching in public transport, replacing wire twists with a professional solution 

- connection to a portable transport terminal, driver's terminal or other device using the interfaces supported by the product;

- receiving and transmitting data over a local network to the driver's terminal or validator that provides wireless communication with the fare payment server ("master"-validator);

- power supply of external devices. For each connected device, a 2A fuse is provided in the product.

 

SPECIFICATION

INTERFACES

•  Ethernet 10/100BaseT - 8

• The product has an output plug for additional power +9 V up to 22.5 watts.

• On two of the 8 ports, it is possible to switch the output power from the input to +9V using a toggle switch, one for each channel. +9V power supply is not reset using an external button. Also, the plugs of these ports are duplicated with a standard 8P8C socket for patch cord connection with RJ45 plug.

CONNECTORS

•  1 х DEGSON 15EDGVC-3.81-02P-14-00AH

•  1 х DEGSON 15EDGVC-3.81-03P-14-00AH

•  1 х DEGSON 15EDGVC-3.81-04P-14-00AH

•  8 х DEGSON 15EDGVC-3.81-06P-14-00AH

•  2 x TJ5-8P8C

OPERATING TEMPERATURE RANGE

•  from -40°С to +80°С

•  working humidity from 10% to 90%, non-condensing

•  storage from -40 to +85 °С

DIMENSIONS

•  without mounting kit - 144 mm x 116 mm x 34 mm 

•  with mounting kit - 187 mm x 116 mm x 34 mm

•  weight - 0.5 kg

POWER SUPPLY

•  directly from the vehicle electrical system, voltage range 12 - 24V, maximum up to 50V

•  protection against polarity reversal and voltage surges in the vehicle electrical system

•  power consumption at a mains voltage of 24V - 50mA

THE KIT INCLUDES

•  VENDOTEK T Switch 8 - 1

• Mating part of the input power plug (optional) – 1

• Mating part of the Ethernet plug 10/100Base T (optional) – 8

• Mating part for button (optional) - 1

• Mating part for output power plug (optional) - 1

•  Manual - 1